How to's- twist bow mix

You will always need:

For this project you will need:

• 8 inches of 1 inch wide grosgrain ribbon
• 8 inches of 1 inch wide check ribbon
• 7 inches of 1 inch wide grosgrain ribbon
• 7 inches of 1 inch wide check ribbon
• a metal hair clip

1. Put your end of ribbon edge on to half of double sided tape.

2. Connect other end of ribbon edge to make a roop.

(dobble sided tape must set on back side of the ribbon)

3. Fold it half, and mark them.

I'm going to twist on to them in 45 degrees.

4. Just remove the tape, and twist ribbon on to the other side just like a picture.

5. Repeat all other ribbons too.

6. Put same length of ribbons together, one grosgrain, and one check ribbon.

7. Pinch your bow in half (lengthwise) and squeeze firmly.

8. Using wire, hold it together.

Repeat other ribbons too.

9. Now you can put two ribbons together using glue gun.

10. And then, just finish with end bow.

Here's pictures of what I've done so far. :)